As a UAV aerial player, DJI is a brand I cannot avoid and has entered Phantom4 and OSMO in his home. Phantom4 (hereinafter referred to as P4) as a drone has been very sophisticated, but there is a very prominent problem in daily use is that when the external screen to do an external monitoring screen phone or Ipad screen brightness is insufficient, in the strong sunlight Even if you can barely see the screen, you cannot judge whether the exposure parameters are appropriate. So when DJI launched DJI Goggles, I immediately booked on the official website. Two 5-inch 1080P screens, in addition to being able to do aerial surveillance screen, experience FPV flight experience, you can also access the computer to see a small video or something. As long as 2999 yuan, can be described as value! 520 morning, SF brother sent DJI Goggles, DJI choose to deliver this day, do you want to express to me? Such a good baby, can not just out of the box, I chose the Spyderco C10 blue steel version to unpack, C10 may have a lot of people, super blue steel version? May not have seen it? Haha DJI Goggles's box is very windy. The front of the white box is a big picture of the Goggles, the United States and the United States. On the back is the precautions, certification information, and what the origin explains. But this white box is actually a box, and there is a black box. To be honest, I think this kind of packaging design is a bit redundant. Although black has a sense of luxury, I personally feel it is more suitable for the image of white and DJI products. some Continue to offer my Super Blue C10 Pure black box with handle inside Is the foreplay a bit long? Next I will speed up the progress! Open the packing box and welcome our DJI Goggles. The first floor is the Goggles main body. The white Goggles main body is lying quietly in the black inner tray. Is it really feel right? Here's a small detail to take note of: The Goggles main body is actually in reverse in the inner bracket; in other words, the bottom is up! Why is this so? Because the bottom of the Goggles body is generally flat and the top is convex, the bottom of the Goggles body is placed between the bottom of the Goggles body and the lid as long as a thin layer of low-density foam is cushioned, and the packaging design is much simpler. . The small problem that comes with this is that the DJI that is printed on the front of the Goggles main body is reversed. I think it's okay! But if DJI wants to be a great company, there is still room for improvement. It is also worth mentioning about this inner tray. With a sandwich structure, Netto uses EVA with a thickness of 6mm, and a pearl with a thickness of 44mm in the middle. It tries to take into account the cost and perception. The EVA surface has been made with the effect of an imitation leather. There is indeed a sense of luxury. Is this part of the middle hollowing out like a little devil? Pick up the first layer of care, we see a headband, charger, accessory box, documentation. The DJI Goggles headband has a built-in battery and a picture transmission antenna, which weighs about 500 grams. The charger is compact and supports three output modes: 5V3A, 9V2A and 12V1.5A Quick Start Guide, Disclaimer, and Item List Inside the accessory box are Micro USB cable, HDMI cable, clips, and wipe lens cloth. It is worth mentioning that the top of the box is also affixed with a low-density sponge with a thickness of 5mm to prevent scratching of the Goggles body. Details are still in place. A family portrait Here are some details Headband interface close-up, in the middle for the power supply, on both sides of the picture transmission antenna terminal, although the antenna terminal gold plated processing, but the number of plug-in or more may affect the signal strength, of course, I just concluded based on old experience, DJI has What may be done to optimize the design? The TF card slot, 3.5mm headphone jack, and MicroHDMI port are located under the rubber cover on the side of the Goggles body. I consulted DJI. This TF card slot can only play videos recorded by DJI aircraft. To see other videos, please connect the computer. The other side is the power switch and the battery level indicator, the same design as the aircraft, short press the switch to check the power; short press and then long press the boot The close-up of the headband and the face is comfortable enough, but the weight of the headband and the main body is 1 kg, which is not easy to wear on the head! Headband adjustment knob Goggles main body nose pad part, at the bottom of the main body with pupil adjustment knob, Fn key and return key DJI Goggles has built-in two 5-inch 1920X1080 displays with a viewing angle of 85 degrees. It can be calculated that the corresponding pixel per degree of viewing angle is (1920X2)/85=45 pixels. Although the retina standard of 60 pixels is still not reached, it is already relatively close. , is also a relatively high resolution of all current VR glasses, the actual wear to see the effect is relatively satisfactory, the screen graininess is still a little, but it is indeed very slight. In addition, the screen quality used by DJI Goggles is quite good. The colors and layers of the screen are all excellent. When DJI Goggles arrives, DJI Goggles continues the DJI product's consistently high cost performance and excellent workmanship. It can be said that it is currently the most worthwhile to start with an FPV eyewear, but this does not mean that he is perfect, some problems (such as weight, resolution) need the whole industry The technical progress can be solved. I am very happy to be able to start this X-ray full of technology products. After I get it, I quickly activate and connect to the computer to start the learning process. I don’t know how long it has been and I’ve been seeing Goggles out of power. Only to find out that the family's toilet paper is used up again! Run out! Finished! Finish!
GPS Tracker, locator for all vehicles
Features that already exist
âš« Tracking: It sends GPS (Location, speed) and sensors (if any) information to your application server with configurable report interval (moving or stationary).
âš« Geofence: It supports circle and polygon setting
âš« Backup Battery (optional): With a backup battery (300mAh), the device sends a tamper message if the main power supply harness is disconnecte
âš« Over Speed Limit: Reports over-speed limit.
âš« 3-Axis Accelerometer: With a built-in 3-axis accelerometer, the device can detect trip start/trip end, and to report harsh braking, harsh acceleration, and impact.
âš« Storing Message: The device stores up to hundreds of messages while there is no GSM signal.
âš« Low Voltage Detection (optional): Device switches to deep sleep mode if supply voltage drops below a threshold.
âš« Power Saving Mode: Device periodically wakes up and sleeps when vehicle engine is OFF.
âš« Expand other peripherals: Plenty of IOs, UARTs and AD to accomplish custom`s requirement.
âš« OTA (Over the Air): The device`s firmware can be upgraded via TCP.
âš« Waterproof Case: IPX65 waterproof.
âš« Bluetooth-positioning: It will support bluetooth feature for positioning.
âš« Mileage: Reports trip start, trip end and the mileage.
âš« CAN Communication: It can read VIN, RPM and many other standard
vehicle parameters via CAN BUS.
âš« GPIO and UART: The device has 5 configurable IOs. It can be
configured as 3 digital inputs, 2 digital outputs; 2 digital input, 1
analog input and 2 digital outputs; 1 digital input, 1 analog input, 1
digital output and 1 UART. These IOs can be used for engine starter
on/off detection, immobilization of engine starter, door lock, and for
connecting to various types of sensors.
Other functions can be customized
Vehicle GPS Trackers,Car GPS Trackers,Fleet management,LTE Vehicle GPS Trackers,LTE Car GPS Trackers eSky wireless Inc , https://www.eskygpsiot.com
