Recently, Henan Tietong has adopted GPON access fiber technology instead of PSTN copper core cable access technology, that is, "light into the copper back," so that the customer access point down, replacing the cable with optical fiber cable, not only solved the cable theft seriously affects customer use Problems, but also greatly improve the quality of the line and reduce the failure rate.

Copper-core cable is the main technology for broadband access at the end of the last century. With the rapid development of broadband, urban-rural junctions and fringe villages have become areas covered by broadband networks. However, due to relatively weak public order in these places, copper-core cables are often Stealing has become a major concern for telecom operators. In order to completely solve this problem, Henan TieTong increased investment, adopted new optical access technologies, and gradually implemented technical substitution for cable coverage networks in the urban-rural junctions and marginal villages within the pipeline, which completely solved serious cable losses, poor line quality, and affecting customers. Telephone, broadband can not be used properly and other issues.

At present, the effect is relatively obvious from the perspective of the implementation of several prefectures and cities.

Wall AP Wireless AP

What is an wall ap? In life, many times we will encounter a bad network situation, generally when the network is bad will affect everyone's mood, everyone likes the situation of network unobstructed, so will go to find a way to keep the network smooth, and wall ap can help you keep the network unobstructed, let's take a look.
1. wall ap
What is the wall ap is a lot of people want to know the problem, wall ap can let everyone's network has been smooth, wall ap is the most important part of the networking, wall ap and the socket at home, you can transmit signals through the wall ap, but want to really use the wall ap you need to install some network cables in each room in advance.
In other words, the wall ap can be directly called a Wireless Router, the wall ap can be used as the antenna of the router, if you put the wall ap in the room, then the signal in the room will be strengthened, but now people prefer the wireless router, so the wall ap also needs POE and AC two devices to assist.
2. AC
AC machine is the most common kind of router, it is very different from ordinary router, can not be used by simple insertion, but need to be set up several times to connect to the network, but also need to be combined with the wall ap to be better used, so the wall ap is very important. The combination of router and wall ap can enhance the network signal.
3. ap networking scheme
The ap networking scheme not only requires the wall ap, but also needs to add the control system, you can choose commercial, you can also choose home, for the network signal requirements of relatively high enterprises can choose commercial, before choosing the networking mode need to be carefully considered.

Wall Ap Wireless Ap,Wall Mount Access Point,Wall Mount Wifi Access Point,Access Point Ac In-Wall

Shenzhen MovingComm Technology Co., Ltd. , https://www.szmovingcomm.com