Cat. 6 (GL-1142) Unshielded Inline Coupler Keystone Jack

Cat.6 Unshielded Coupler Keystone Jack
Specifications:
1.Meet TIA/EIA-568-A and TIA/EIA-568-B Category 5E requirements.
2.Meet TIA/EIA TSB-40
3.Meet ISO/IEC Generic Cabling Standard 11801
4.Meet CENELEC Generic Cabling Standard EN50173
5.Angle: 90 Degree
6.Termination: 110- Krone-Dual type
7.Electrical: According to UL 1863
8.Current rating: 1.5 Amp Max.
9.Voltage rating: 150 Volts
10.Contact resistance: 20 m-ohm
11.Insulation Resistance: 500M-ohm
12.Dielectric Withstand Voltage: 1000 V AC RMS, 60Hz 1min
13Materials:
14Housing: PC UL94V-0
15IDC: PC UL94V-0, Accept 22-26 AWG Solid Wire.
16PCB: FR4 1.6mm(0.04") thickness, 2 layers
17Contact: PC Ul94V-0, 0.45mm(0.018") Diameter Phosphor bronze with 3 U" to 50 U" Gold plating on contact area

 

Cat.6 Unshielded Coupler Keystone Jack
Specifications:
1.Meet TIA/EIA-568-A and TIA/EIA-568-B Category 5E requirements.
2.Meet TIA/EIA TSB-40
3.Meet ISO/IEC Generic Cabling Standard 11801
4.Meet CENELEC Generic Cabling Standard EN50173
5.Angle: 90 Degree
6.Termination: 110- Krone-Dual type
7.Electrical: According to UL 1863
8.Current rating: 1.5 Amp Max.
9.Voltage rating: 150 Volts
10.Contact resistance: 20 m-ohm
11.Insulation Resistance: 500M-ohm
12.Dielectric Withstand Voltage: 1000 V AC RMS, 60Hz 1min
13Materials:
14Housing: PC UL94V-0
15IDC: PC UL94V-0, Accept 22-26 AWG Solid Wire.
16PCB: FR4 1.6mm(0.04") thickness, 2 layers
17Contact: PC Ul94V-0, 0.45mm(0.018") Diameter Phosphor bronze with 3 U" to 50 U" Gold plating on contact area

 

48v15Ah Lithium Ion Battery

48V15Ah Lithium Ion Battery,48V15Ah Lithium Battery Pack,Li-Ion 48V15Ah Lithium Battery Pack,Echargeable Lithium Battery Pack 48V

Jiangsu Zhitai New Energy Technology Co.,Ltd , https://www.zt-tek.com