Headlight Flasher

+ September 98 Project: Headlight FlasherThis circuit was requested from an email. It will allow your car headlights to flash on and off at the same TIme or it will cause them to flash alternately. The circuit is based on the 555 TImer. It is used in the astable mode. The 555 TImer output will go high for an adjustable period of TIme and then turn off. It will then repeat the procedure.

The time is adjusted by R1. To hook up the circuit to your car you must locate the positive wire from the fuse box to the headlights. Cut the wire and insert the relay contact and bypass switch. The bypass switch will allow you to bypass the relay contact for normal headlight operation. In the alternateing headlight configuration you must cut the positive wire to each headlight and wire in the relay contact.

Diameter 20mm DMX 3D Tube we have different length 0.5m, 1m, 1.5m and 2m , led on double sides with 360degree beam angle for disco,bar,nightclub decoration. the DMX 3D Tube work with DMX Artnet Controller and Madrix software, the LED 3D tube can achieve 3D effects, like 3d illusion lamp, with Madrix software, the 3D  LED Tube can music makes lights.
Diameter 30mm DMX 3D Tube, it also named Led Meteor Lights and Led Video Light, led on double sides with 360degree beam angle for disco, bar, nightclub decoration. With Madrix software, the DMX 3D Tube can show rain effects lights.

Diameter 50mm DMX 3D Tube for 3D Deco Light and concert light, the DMX 3D Tube work with DMX Artnet controller and Madrix software, the tube can achieve 3D effets.

Photo show of DMX 3D Tube:

DMX 3D tube 02

DMX 3D Vertical Tube

DMX 3D LED Tube Light

Dmx 3D Led Tube Light,3D Led Tube,Led Meteor Lights,3D Deco Light

Shenzhen Iseeled Technology Co., Ltd. , https://www.iseeledlight.com